2JZ/2JX/2JV/2H7-1
1-3-7
Image
processing
U464 Setting the ID correction operation
Permission
Set Time Interval
Leaving Time
Permission Act.(50sheets)
Permission (ON/Sleep out)
Permission (AP/NE)
Execution Timing
Driving Time
Execution Print Rate
Set Custom
ON
480
60
ON
ON
ON
1800
600
20
OFF
U465 Data reference for ID correction -
U467 Setting the color registration adjustment
Color Regist Adjustment ON
Transfer Belt Speed Adj. ON
Set Timing 2
U468 Checking the color registration data -
U470 Setting the JPEG compression ratio
System
Copy
Send
90/90
90/90/90/90
30/40/51/70/90
30/40/51/70/90
30/40/51/70/90
30/40/51/70/90
15/25/60
15/25/60
U473 Adjusting laser power output
Set Sensitivity
Adjust LSU Laser Power
Density Correction
Input Density Adjust Value
Set Density (Emit Time/Dot)
-
16/16/16/16
ON
-
ALL:0
U474 Checking LSU cleaning operation 1000
U485 Setting the image processing mode 3
U486 Setting color/black and white operation mode MODE1
Network
scanner
U510 Setting the enterprise mode -
Other U901 Checking copy counts by paper feed locations -
U902 Checking/clearing finisher punch count -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the call for service counts -
U905 Checking counts by optional devices -
U906 Resetting partial operation control -
U908 Checking the total counter value -
U910 Clearing the coverage data -
U911 Checking/clearing copy counts by paper sizes -
U917 Setting backup data reading/writing -
U920 Checking the copy counts -
Section
Item
No.
Content of maintenance item
Initial setting*
25/25,30/30 ppm 40/40 ppm 50/40 ppm
*Initial setting for executing U020, *1: The item initialized for executing U021
To Next Page
Loading...
