2JZ/2JX/2JV/2H7-1
1-3-6
Operation
panel and
support
equipment
U246 Setting the paper ejection device
3000 FINISHER
BOOKLET FOLDER
0/0/0/0/0/0
*1
0/0/0/0/0/0/0/0
*1
U247 Setting the paper feed device -
Mode
setting
U250 Change the maintenance count pre-set -
U251 Checking/clearing the maintenance count -
U252 Setting the destination -
U253 Switching between double and single counts DOUBLE COUNT
(A3/LEDGER)
U260 Selecting the timing for copy counting EJECT
*1
U265 Setting OEM purchaser code 0
U276 Setting the copy count mode MODE0
U284 Setting 2 color copy mode OFF
*1
U285 Setting service status page ON
*1
U325 Setting the bias between pages OFF
*1
U326 Setting the black line cleaning indication ON/8
*1
U327 Setting the cassette heater ON/OFF MODE2
*1
U328 Side ejection setting OFF
*1
U332 Setting the size conversion factor 1.0
*1
U341 Specific paper feed location setting for printing func-
tion
-
U343 Switching between duplex/simplex copy mode OFF
*1
U345 Setting the value for maintenance due indication -
Image
processing
U402 Adjusting margins of image printing 0/0/0/0
U403 Adjusting margins for scanning an original on the
contact glass
2.0/2.0/2.0/2.0
U404 Adjusting margins for scanning an original from the
DP
3.0/2.5/3.0/4.0/3.0/2.5/3.0/4.0
U407 Adjusting the leading edge registration for memory
image printing
47
U410 Adjusting the halftone automatically -
U411 Adjusting the scanner automatically -
U412 Adjusting the uneven density -
U425 Setting the target -
U429 Setting the offset for the color balance
Text + Photo
Photo
Print
Text
Map
0/0/0/0
0/0/0/0
0/0/0/0
0/0/0/0
0/0/0/0
U432 Setting the center offset for the exposure
Full Color
Mono Color
0/0/0
0/0/0
Section
Item
No.
Content of maintenance item
Initial setting*
25/25,30/30 ppm 40/40 ppm 50/40 ppm
*Initial setting for executing U020, *1: The item initialized for executing U021
To Next Page
Loading...
