Action Yes No
Step 6
Replace the original operator panel assembly with a new and not
previously installed operator panel door assembly or the operator
panel assembly. Go to
“Operator panel door assembly removal
(models X651, X652, X654,X656)” on page 345 or “Operator
panel assembly removal (model X658)” on page 349.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Motor (HCIT tray lift) service check
Action Yes No
Step 1
Check and remove all obstructions in the HCIT lift area.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check the connections on the HCIT tray lift motor assembly for
proper connections.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Replace the HCIT tray lift drive motor assembly. Go to
“High
capacity input tray (HCIT) tray lift drive motor assembly removal”
on page 427.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
RAM memory error service check
Action Yes No
Replace the appropriate module.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Output option is missing service check
Action Yes No
Step 1
a Turn o the main power.
b Remove, and then reinstall the output option.
Does the problem remain?
Go to step 2. The problem is
solved.
7462
Diagnostic information
253
To Next Page
Loading...
