Lexmark 7462 series - Page 254

Action Yes No
Step 2
Check all the output option interface connections, and if necessary,
replace the connections.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Too many options installed service check
Action Yes No
Remove the appropriate input or output options.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
The printer has detected a hot plug service check
Action Yes No
a Turn o the printer, and then install all the options.
b Turn the printer back on.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Rear doors are open service check
Action Yes No
Close the rear door on all output options.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
7462
Diagnostic information
254