Lexmark 7462 series - Page 88

Error code Description Action
202.31 Sensor (fuser output) static jam (type 2 fuser)
Media remains on the sensor (fuser output) during
the warm-up sequence.
Go to
“Sensor (fuser output) static jam service
check” on page 95
202.32 Sensor (fuser output) lingering jam (type 2 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time.
Go to
“Sensor (fuser output) lingering jam
service check” on page 94
202.34 Sensor (fuser output) lingering jam (type 2 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time.
202.35 Sensor (fuser output) lingering jam (type 2 fuser
and destination is output option)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and did not reach
the sensor (narrow media).
202.36 Sensor (fuser output) lingering jam (type 2 fuser
and destination is standard bin)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and also reached
the sensor (narrow media).
202.37 Sensor (fuser output) lingering jam (type 2 fuser
and destination is output option)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time, and also reached
the sensor (narrow media).
202.38 Sensor (fuser output) static jam and sensor
(narrow media) static jam (type 2 fuser)
Media remains on the sensor (fuser output) and
the sensor (narrow media) during the warm‑up
sequence.
Go to
“Paper jam around fuser exit or redrive
area service check” on page 92
202.50 Paper jam around fuser exit or redrive area (type
1 fuser and fuser page count exceeded life)
Page may be jammed in fuser exit or redrive area.
202.51 Sensor (fuser output) lingering jam (type 1 fuser,
destination is standard bin, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the specified time.
Go to
“Sensor (fuser output) lingering jam
service check” on page 94
202.52 Sensor (fuser output) lingering jam (type 1 fuser,
destination is standard bin, and fuser page count
exceeded life)
Media reached the sensor (fuser output), but did
not clear it in the
specified
time.
7462
Diagnostic information
88