UM10375 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
User manual Rev. 3 — 14 June 2011 199 of 368
NXP Semiconductors
UM10375
Chapter 12: LPC13xx UART
12.6.15.1 Baud rate calculation
UART can operate with or without using the Fractional Divider. In real-life applications it is
likely that the desired baud rate can be achieved using several different Fractional Divider
settings. The following algorithm illustrates one way of finding a set of DLM, DLL,
MULVAL, and DIVADDVAL values. Such set of parameters yields a baud rate with a
relative error of less than 1.1% from the desired one.
To Next Page
Loading...
Need help?
General
