Panasonic KX-TD816 - Page 410

5.1 Optional Programming
410 Optional Programming
05 7 [For VM DPT Integration]
Enables or disables sending the Follow
On ID when an outside call is routed to
a voice mail port by IRNA.
[For VM Inband Integration]
Enables or disables sending the Follow
On ID when an outside call is routed to
a voice mail port by IRNA.
• When the port is in AA service
mode;
enable:
the mode will change to the
VM service mode.
disable:
the mode will not be
changed.
• When the port is in VM service
mode;
enable:
the mode will not be
changed.
disable:
the mode will change to the
AA service mode.
0
: enable
1
: disable
1 • Voice Mail
Integration for
Digital
Proprietary
Telephones
•Voice Mail
Integration for
Inband
8 Reserved
9 Enables or disables dial tone 2 when an
extension sets programmable extension
features such as Call Waiting.
0
: disable
1
: enable
1None
10 Determines the result when pressing the
FLASH button during an outside call
(When Area 01-bit 3=0).
Flash:
Disconnects and accesses the
same outside line.
Terminate:
Terminates the outside line
and accesses the intercom. It is
convenient to route the outside call
according to ARS if ARS is active.
0
: Terminate
1
: Flash
1Flash
11 Selects the message waiting ring type: 3
quick rings or 2 normal rings, for single
line telephones.
0
: 3 times by
40 ms
1
: 2 times by
280 ms
1 Message Waiting
Explanation
Area Bit Description Selection Default Features Guide
References