Panasonic KX-TD816 - Page 411

5.1 Optional Programming
Optional Programming 411
05 12 Selects the SMDR format for an
incoming call with Caller ID. The
caller's number only or caller's number
only or caller's number and name is
selected.
0
: <Incoming> +
caller no.
1
: <I> + caller no.
+ name
1SMDR
13 Enables or disables the SMDR printout
for RC (when an incoming call occurs)
and AN (when an incoming call is
answered).
0
: enable
1
: disable
1SMDR
14 Selects the result when a call from DISA
/ DID is invalid.
0
: IRNA
1
: reorder tone is
sent
1 None
15 Selects the result of pressing "0"
(default); calls operators 1 and 2 at the
same time or Operator 1 first and then
Operator 2 if Operator 1 is busy.
0
: Operators 1 and
2
simultaneously
1
: Operator 1 first
and then
Operator 2
1Operator
16 Enables or disables the SMDR printout
when the Timed Reminder starts and the
alarm is not answered.
0
: enable
1
: disable
1 Timed Reminder
Explanation
Area Bit Description Selection Default Features Guide
References