Panasonic KX-TD816 - Page 412

5.1 Optional Programming
412 Optional Programming
06 1 Determines whether the account code is
printed out or not (shown in dots) by the
SMDR.
0
: not printed out
1
: printed out
1 Account Code
Entry
2,3 Reserved
4 Enables or disables sending outside line
access number "9/0" to a TIE line. When
you dial outside line access number "9/
0" and the outside line is busy, the
system can automatically send outside
line access number "9/0" to a TIE line so
that you can access the outside line
through another PBX.
0
: enable
1
: disable
1E&M (TIE)
Line Service
5 Determines whether to printout the last
entered or the first entered account code
in the SMDR.
0
: first entered
code
1
: last entered
code
1 Account Code
Entry
6 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this programme determines
whether the extension where the Do Not
Disturb feature is set receives the call or
not.
0
: receive
1
: not receive
1None
7 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this programme determines
whether the extension where the Call
Forwarding feature is set receives the
call or not.
0
: receive
1
: not receive
1None
8 Enables or disables Circular and
Termination hunting.
0
: disable
1
: enable
1 Station Hunting
9,10 Reserved
11 Enables or disables the COLP feature.
0
: enable
1
: disable
1 COLP
Explanation
Area Bit Description Selection Default Features Guide
References