Panasonic KX-TD816 - Page 434

434 Default Values
4 E1 Programming
Programme Default
[109] Expansion Unit Type KX-TD816: C;E
KX-TD1232: Master and Slave – C;E1;E2
[418] Outside Line Number Assignment for
ISDN / E1
All outside lines – Not stored
[622] Extension ANI Number All jacks-1/2 – Not stored
[707] E1 Clock Mode External
[720] E1 TIE Ringing Service All outside lines – TIE
[721] PRI / E1 Reference CO All outside lines (PRI / E1 line) – CO 09
[722] E1 Answer Wait Timer All outside lines – 1 min
[723] E1 Sending TIE Caller ID All outside lines – No
[740] E1 Channel Assignment All E1 channels – Disable
[741] E1 Dial Mode All E1 channels – Pulse-10
[742] E1 CPC (IN) All E1 channels – 02
[743] E1 CPC (OUT) All E1 channels – 02
[744] E1 DID Receive Digit All E1 channels – 4
[745] E1 DR2 Receiver All E1 channels – Undefined
[747] E1 Line Coding HDB3
[748] E1 Frame Sequence PCM30
[749] E1 Frame Option C=0, D=1
[750] E1 First Dial Timer (DR2 / TIE) 002
[751] E1 %Break 60%
[752] E1 Dial Click Tone Yes
[753] E1 Inter Digit Pause 830 ms
[754] E1 Flash Detection 208-1016