Default Values 435
[755] E1 Answer Decision Timer 001
[756] E1 Seizure ACK Wait Timer 05
[757] E1 Pulse Type Type-A
[758] E1 DR2 Signalling Type Normal
[759] E1 Inter Digit Timer 05
[760] E1 Bit Position for Dial Pulse A-bit
[761] E1 Bit Position for Clear Back A-bit
[762] E1 E&M Signalling Type Type-2
[763] E1 E&M Pulse Length (Seizure) 150 ms
[764] E1 E&M Pulse Length (Answer) 600 ms
[765] E1 E&M Pulse Length (Clear) 600 ms
[766] E1 Meter Pulse Detection Mode No Detection
[767] E1 Meter Pulse Detection Bit Position B-bit
[768] E1 Meter Pulse Detection Length 16
[769] E1 DSP Gain (DTMF Transmit) 03
[770] E1 DSP Gain (DTMF Receive) 16
[771] E1 DSP Gain (MFC-R2 Transmit) 16
[772] E1 DSP Gain (MFC-R2 Receive) 08
[773] E1 Frame Error Detection No
[774] E1 Error Rate 0
[775] E1 ANI Service Mode None
[776] E1 ANI Maximum Digits 00
[777] E1 MFC-R2 Forward Timer 15 s
[778] E1 MFC-R2 Backward Timer 15 s
Programme Default
To Next Page
Loading...
