Signal Routing and System Configuration
R&S
®
SMW200A
124User Manual 1175.6632.02 ─ 30
4.4 System Configuration Settings
The "System Configuration" dialog is the central point for the configuration of the signal
flow. The provided settings assist you to fulfill your configuration tasks, like changing
the selected MIMO mode or support you by connecting new devices to the baseband
outputs.
The settings in this dialog comprise the fading configuration, the baseband source con-
figuration, the mapping, and the processing of the generated I/Q streams. Form this
dialog, you can also control and configure the connections to instruments connected to
the RF and I/Q connectors.
For a step-by-step description of how to use the provided settings, refer to Chapter 4.9,
"How to Connect External Instruments and Configure the Signal Flow", on page 188 .
Required options
The equipment layout for the generation of complex signals (Standard baseband)
includes:
●
2 options standard baseband generator (R&S SMW-B10)
(incl. digital interfaces CODER 1/2 per installed option)
●
Option baseband main module, two I/Q paths to RF (R&S SMW-B13T)
●
Up to four options fading simulator (R&S SMW-B14)
(incl. one digital interfaces FADER 1/2/3/4 per installed option)
●
Option MIMO fading (R&S SMW-K74)
●
Optional option higher-order MIMO (R&S SMW-K75)
●
Optional option multiple entities (R&S SMW-K76)
●
Optional option Slow IQ (R&S SMW-K551)
●
Optional option steam extender (R&S SMW-K550)
●
Optional option MIMO subsets (R&S SMW-K821)
The equipment layout for the output of wideband digital I/Q signals includes:
●
2 options wideband baseband generator (R&S SMW-B9)
(incl. digital interfaces CODER 1/2 and HS CODER 1/2 and per installed option)
●
Option wideband baseband main module, two I/Q paths to RF (R&S SMW-B13XT)
●
Up to four options fading simulator (R&S SMW-B15)
●
Option wideband digital baseband outputs R&S SMW-K19
Settings:
For description of the "Multi-Instrument" settings, see Chapter 10.3.1.1, "Multi-Instru-
ment Settings", on page 641.
This section described the following settings.:
System Configuration Settings
To Next Page
Loading...