Rohde & Schwarz R&S SMW200A - VISA Resource Strings

Network Operation and Remote Control
R&S
®
SMW200A
788User Manual 1175.6632.02 ─ 30
Default Gateway
Displays the gateway address.
This address identifies the router on the same network as the instrument that is used to
forward traffic to destinations beyond the local network.
To assign the gateway address manually, select Address Mode > "Static".
Remote command:
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway on page 1230
DNS Suffix
Displays the primary DNS (Domain Name System) suffix, that means the DNS name
without the hostname part.
The DNS system uses the suffix for registration and name resolution for unique identifi-
cation of the instrument in the entire network.
To assign the DNS suffix manually, select Address Mode > "Static".
Remote command:
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain on page 1229
DNS Server
Determines the preferred server for name resolution. The DNS server contains the
underlying numerical values that are required for name resolution of the hostname as
part of the IP address.
To select the DNS server manually, select Address Mode > "Static".
Remote command:
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS on page 1230
MAC Address
Indicates the MAC (Media Access Control) address, a unique identifier of the network
adapter in the R&S SMW.
Remote command:
:SYSTem:COMMunicate:NETWork:MACaddress on page 1229
13.4.2 VISA Resource Strings
Access:
► Select "System Config > Remote Access > Visa Resource Strings".
Remote Access Settings