Remote Control Commands
R&S
®
SMW200A
1230User Manual 1175.6632.02 ─ 30
Parameters:
<Domain> string
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Manual operation: See "DNS Suffix" on page 788
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname <Hostname>
Sets an individual hostname for the R&S SMW.
Note:We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<Hostname> string
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Manual operation: See "Hostname" on page 786
:SYSTem:COMMunicate:NETWork[:COMMon]:WORKgroup <Workgroup>
Sets an individual workgroup name for the instrument.
Parameters:
<Workgroup> string
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Manual operation: See "Workgroup" on page 787
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS <DNS>
Determines or queries the network DNS server to resolve the name.
Parameters:
<DNS> string
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Manual operation: See "DNS Server" on page 788
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway <Gateway>
Sets the IP address of the default gateway.
SYSTem Subsystem
To Next Page
Loading...