Rohde & Schwarz R&S SMW200A - Settings: Mode

Signal Routing and System Configuration
R&S
®
SMW200A
126User Manual 1175.6632.02 ─ 30
This section focuses on the settings available in the "System Configuration" dialog.
For further details about the fading functionality, refer to the user manual "Fading Simu-
lator".
For step-by-step description on how to use the provided settings, refer to Chap-
ter 4.9.3, "How to Define the MIMO Scenario", on page 191.
Settings:
Mode........................................................................................................................... 126
Signal Outputs.............................................................................................................127
Signal Routing.............................................................................................................128
System Configuration LxMxN......................................................................................128
└ Entities (Users, Cells)................................................................................... 128
└ BB Signals (Tx Antennas).............................................................................129
└ Streams (Rx Antennas).................................................................................129
Subset.........................................................................................................................129
BB Bandwidth..............................................................................................................130
CA Bandwidth............................................................................................................. 130
Baseband Source Config............................................................................................ 130
Duplicate Streams.......................................................................................................131
HS Channels per.........................................................................................................131
Set to Default.............................................................................................................. 132
Apply........................................................................................................................... 132
Ok................................................................................................................................132
Mode
Switches between standard and advanced mode.
Execute "Apply" to trigger the instrument to adopt the selected configuration.
"Standard"
Provided for non-MIMO configuration.
If Wideband baseband is installed, wideband signals with a band-
width of up to 2 GHz are generated.
"Advanced"
Depending on the installed hardware and software options, enables
the configuration of:
●
Complex MxN MIMO scenarios with up to 8 Tx or Rx antennas,
e.g. 4x4, 2x8, or 8x2 MIMO
●
multiple entity scenarios with up to four standalone 2x2 MIMO
systems, e.g. 4x2x2 scenarios
●
Up to 8 SISO systems, e.g. 8x1x1 scenarios
See also:
●
Chapter 4.9.3, "How to Define the MIMO Scenario", on page 191
●
Chapter 4.9.7, "How to Generate a 2x8 MIMO Signal for BS
Tests", on page 204
●
Data sheet
"Radar Echo
Generation
(REG)"
Option: R&S SMW-K78
Enables the R&S SMW to work as a radar echo generator.
The fading simulator is disabled.
See user manual R&S®SMW-K78 Radar Echo Generation.
System Configuration Settings