File and Data Management
R&S
®
SMW200A
699User Manual 1175.6632.02 ─ 30
There, you can perform standard functions like creating directory, or saving files.
6. In the user directory, create a directory, e.g. test ftp.
7. Select SAVE/RCL.
Open the /var/user/ directory.
The dialog displays the /var/user/test ftp directory.
11.9.3 Accessing the R&S SMW File System via SMB (Samba)
The SMB (Samba) protocol is an alternative way to access the file system of the instru-
ment from a remote PC. This protocol works if both the instrument and the PC are con-
nected to a LAN.
How to: see Chapter 13.6.3, "How To Connect to LAN", on page 804.
To access the file system via SMB
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via ftp
2. Enable write permission on the file system
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter //<"IP Address" of the Instrument>, e.g. ftp://
10.124.0.166.
How to Transfer Files from and to the Instrument
To Next Page
Loading...