Rohde & Schwarz R&S SMW200A - Understanding the Display Information

Getting Started
R&S
®
SMW200A
92User Manual 1175.6632.02 ─ 30
3.5.3 Understanding the Display Information
The block diagram of the R&S SMW displays all main settings and generator states,
divided into three main operation areas.
2
3
1
Figure 3-21: Block diagram
1 = Status bar
2 = Block diagram
3 = Taskbar/softkey bar
● Status Bar............................................................................................................... 92
● Block Diagram.........................................................................................................93
● Taskbar....................................................................................................................94
● Additional Display Characteristics...........................................................................95
3.5.3.1 Status Bar
The status bar at the top of the screen indicates the RF frequency and the level of the
output signal provided to the DUT. You can set both parameters directly here.
1
2 3
Instrument Control