Configuring the RF Signal
R&S
®
SMW200A
540User Manual 1175.6632.02 ─ 30
8.8.4 Modulation Settings
Access:
► Select "RF > Analog Modulation".
The "Modulation" dialog contains all functions and settings to configure the analog
modulations, the LF signal sources for performing a modulation, and the LF signal
output.
The remote commands required to define these settings are described in:
● Chapter 14.19.3.2, "SOURce:AM Subsystem", on page 965
● Chapter 14.19.3.3, "SOURce:FM Subsystem", on page 969
● Chapter 14.19.3.4, "SOURce:PM Subsystem", on page 974
● Chapter 14.19.3.5, "SOURce:PULM Subsystem", on page 979
● Chapter 14.19.11, "SOURce:LFOutput Subsystem", on page 1152
8.8.4.1 Pulse Modulation Settings
Access:
► Select "RF > Analog Modulation > Pulse Modulation".
Table 8-11: Pulse Modulation
"Signal Source > Pulse Generator " (internal) "Signal Source > External"
The "Pulse Modulation" dialog contains all parameters required to configure pulse
modulation and pulse signal generation.
It also displays the pulse signal graphically.
The remote commands required to define these settings are described in Chap-
ter 14.19.3.5, "SOURce:PULM Subsystem", on page 979.
Settings:
State............................................................................................................................541
Source.........................................................................................................................541
Transition Type............................................................................................................541
Video Polarity..............................................................................................................541
Polarity Pulse Input..................................................................................................... 541
Threshold USER4-6 Input/Threshold Pulse Input.......................................................542
Impedance Pulse Input............................................................................................... 542
Analog Modulations
To Next Page
Loading...