Rohde & Schwarz R&S SMW200A - How to Save a Hardcopy of the Display

File and Data Management
R&S
®
SMW200A
706User Manual 1175.6632.02 ─ 30
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>, where Y, M and D mean
year, month, Day; Number is the Current Auto Number.
You can activate or deactivate each component separately.
The "Resulting filename" indicates the current filename syntax.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 884
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 884
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 883
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 883
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 883
Current Auto Number ← Hardcopy Options > Automatic Naming
Indicates the number which is used in the automatically generated filename.
Note: When initially switching on the instrument, the number is reset to the lowest pos-
sible value. Starting with number 0 the output directory is scanned for existing files. As
long as files with the same name are existing, the number is increased by 1. The num-
ber is automatically set so that the resulting filename is unique within the selected path.
The current number is not in the save/recall file but is temporarily stored within the
database. At the following save operation, the number is increased.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer? on page 884
11.10.2 How to Save a Hardcopy of the Display
1. Press the [HCOPY] key.
Creating Screenshots of Current Settings