Getting Started
R&S
®
SMW200A
76User Manual 1175.6632.02 ─ 30
Select "RF A > On".
The instrument generates an EUTRA/LTE test signal with the selected channel
bandwidth, frequency, and level.
With these first steps, you have gained an impression of the provided functionality.
For a comprehensive description of the full range of capabilities, refer to the user man-
ual "EUTRA/LTE Digital Standard for R&S SMW200A".
3.3.9 Enabling MIMO Configuration
The R&S SMW supports versatile MIMO configurations and provides comfortable func-
tions to simplify the definition and signal routing for MIMO test setups and configuration
involving several instruments. For complex routing scenarios, the "System Configura-
tion" functionality is the start and central configuration point. Within one dialog, you can
configure complex configurations with up to 8 Tx or Rx antennas or up to two stand-
alone 2x2 MIMO systems, e.g. 8x2 MIMO or LTE-A carrier aggregation with 2x2 MIMO.
This example does not cover the whole range of the "System Configuration" capabili-
ties but delivers an insight into the topic. The example shows how to use coupled
baseband sources and select a suitable fading and baseband configuration to generate
an EUTRA/LTE signal in 2x2 MIMO configuration.
To learn more and to explore the whole range of capability provided by the "System
Configuration" function, in particular how to connect and configure external devices,
refer to Chapter 4, "Signal Routing and System Configuration", on page 106.
Trying Out the Instrument
To Next Page
Loading...