Rohde & Schwarz R&S SMW200A - Shutting down and Rebooting the Instrument

General Instrument Functions
R&S
®
SMW200A
768User Manual 1175.6632.02 ─ 30
Access:
► Select "Setup > Settings > Undo/Redo".
The dialog contains all functions for enabling the "Undo/Redo" functionality.
Settings:
State............................................................................................................................768
History List.................................................................................................................. 768
Clear History............................................................................................................... 768
Apply........................................................................................................................... 768
State
Enables the recording of the performed actions.
History List
Lists the performed actions, provided "Undo/Redo" state is "On".
Clear History
Deletes the recorded list of the performed steps.
Apply
Performs the "Undo/Redo".
If you select a previously performed action of the list, all subsequent actions are
undone. The list entries remain.
If you select a subsequently executed action, you can restore all the actions undone up
to this state.
12.8 Shutting Down and Rebooting the Instrument
On the front panel, the [On/Standby] key switches the instrument from the standby to
the ready state or vice versa. In remote operation from a remote computer or in manual
control, there is another possibility to shut down the instrument or to reboot the system.
Shutting Down and Rebooting the Instrument