Rohde & Schwarz R&S SMW200A - Automatic Naming

To Next Page

To Previous Page

Remote Control Commands

R&S

SMW200A

882User Manual 1175.6632.02 ─ 30

:HCOPy[:EXECute]

Generates a hard copy of the current display. The output destination is a file.

Example: See Example "Store a hard copy of the display" on page 879

Usage: Event

Manual operation: See "Save" on page 704

14.14.2 Automatic Naming

Use the following commands to automatically assign a file name.

:HCOPy:FILE[:NAME]:AUTO?.........................................................................................882

:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 882

:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 883

:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 883

:HCOPy:FILE[:NAME]:AUTO:STATe.................................................................................883

:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe................................................................883

:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe...........................................................883

:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................. 883

:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................884

:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 884

:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe........................................................... 884

:HCOPy:FILE[:NAME]:AUTO?

Queries path and file name of the hardcopy file, if you have enabled Automatic Nam-

ing.

Return values:

<Auto> string

Example: See Example "Store a hard copy of the display" on page 879

Usage: Query only

:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>

Determines the path to save the hard copy, if you have enabled Automatic Naming.

If the directory does not yet exist, the instrument automatically creates a new directory,

using the instrument name and /var/user/ by default.

Parameters:

<Directory> string

*RST: /var/user/

Example: See Example "Store a hard copy of the display" on page 879

Manual operation: See "Path..." on page 705

HCOPy Subsystem