Rohde & Schwarz R&S SMW200A - Page 1229

Remote Control Commands
R&S
®
SMW200A
1229User Manual 1175.6632.02 ─ 30
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<MacAddress> string
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Manual operation: See "MAC Address" on page 788
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 1217.
Usage: Query only
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
SYSTem:COMMunicate:NETWork:RESTart
// Terminates the network connection and sets it up again
Usage: Event
Manual operation: See "Restart Network" on page 786
:SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Return values:
<State> 0 | 1 | OFF | ON
Example: See Example "Retrieving information on network-related set-
tings" on page 1217.
Usage: Query only
Manual operation: See "Network Status" on page 786
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain <Domain>
Determines the primary suffix of the network domain.
SYSTem Subsystem