Elements and Controls of the Graphical User Interface
R&S
®
SMW200A
1302User Manual 1175.6632.02 ─ 30
"Settings dialog"
1 2 3 4 5 6
7
8
9
10
1 = Dialog name
2, 10 = Status indicators
3, 4 = Key parameter setting
5 = Parameter entry field
6 = Status indicator
7 = Checkbox
8 = Access keys for further settings dialogs
9 = Parameters
The name(1) of a settings dialog is displayed in the header. It is a
generic term that refers to the functionality covered in the dialog. Dia-
log names are, for example, a digital standard (EUTRA/LTE).
The header of a settings dialog contains the well known buttons to
minimize or close the dialog, and a parent name which is composed
of:
●
Parent name
●
Generic term of the function
A settings dialog is mostly divided into tabs with logically grouped
parameters. The tab name expresses the content and can contain
status indicators or the set value of a key parameter.
See Chapter C.6, "Naming Conventions in the User Interface",
on page 1308
Elements Displayed for Interactions
To Next Page
Loading...