Getting Started
R&S
®
SMW200A
42User Manual 1175.6632.02 ─ 30
●
Acts like the [Enter] key, when it is pressed.
Navigation Keys
The navigation keys can be used alternatively to the rotary knob to navigate through
dialog boxes, diagrams, or tables.
Table 3-6: Navigation keys
Type of key Description
[Up/Down] key The [Up] and the [Down] key does the following:
●
In a numeric edit dialog box, increase or decrease the instrument
parameter.
●
In a list, scroll forward and backward through the list entries.
●
In a table, move the selection bar vertically.
●
In windows or dialog boxes with vertical scrollbar, move the scroll-
bar.
[Left/Right] key The [Left] and the [Right] key does the following:
●
In an alphanumeric edit dialog box, move the cursor.
●
In a list, scroll forward and backward through the list entries.
●
In a table, move the selection bar horizontally.
●
In windows or dialog boxes with horizontal scrollbar, move the
scrollbar.
Display Keys
The display keys arrange different windows on the display.
Table 3-7: Display keys
Display key Assigned functions
[NEXT WINDOW] Toggles between the active dialogs
[RESIZE WINDOW] Adjusts the size of the active dialog to use the whole height of the dis-
play.
[ESC] Closes all kinds of dialog boxes, if the edit mode is not active. Quits the
edit mode, if the edit mode is active. In dialog boxes that contain a "Can-
cel" button it activates that button.
For "Edit" dialog boxes the following mechanism is used:
●
If data entry has been started, it retains the original value and
closes the dialog box.
●
If data entry has not been started or has been completed, it closes
the dialog box.
3.2.1.3 Connectors
The RF and I/Q connectors and various others interface connectors are on the front
panel.
I/Q, I/Q Bar
BNC connectors for input of external I/Q signals for analog modulation. The signals are
fed directly into the I/Q modulator.
One pair of I and Q inputs are available per installed RF path.
Instrument Tour
To Next Page
Loading...