Configuring the RF Signal
R&S
®
SMW200A
537User Manual 1175.6632.02 ─ 30
In the tab of path A (see the first image), you can see the settings of the modulations in
path A. The signal coming from B is only displayed. Vice versa, the tab in the path B
(second image) shows the configuration of the modulations of this path, but also the
signal coming from A.
8.8.2.4 Modulation Signal Waveforms
The following graphs show the modulation signal waveforms of the R&S SMW.
LF Generator
The LF and multifunction generators support the following signal shapes:
Sine
1 = Period
Pulse
1 = Pulse width 2 = Pulse period
Analog Modulations
To Next Page
Loading...