General Instrument Functions
R&S
®
SMW200A
735User Manual 1175.6632.02 ─ 30
2. If you already have a saved user menu file on the instrument, you can load with
"Recall User Menu".
Creating a "User Menu"
To create your own user dialog with settings:
1. Open a dialog with settings you frequently use.
2. Select a parameter.
3. Open the context menu and select "Add to User Menu".
A favorites icon indicates that the parameter is used in the "User Menu".
The "User Menu" button in the taskbar confirms that you have created a "User
Menu" with at least one entry.
4. Press the [USER] key.
The "User Menu" dialog shows all parameters that you have added to the list.
You can modify the parameter settings directly in this dialog, e.g .change a state or
set values, as you do in the particular dialog the parameter originally belongs to.
5. To remove an entry, select the parameter either in the "User Menu" or in the dialog
where it originally belongs to.
Organizing Frequently Used Settings as Favorites
To Next Page
Loading...