Rohde & Schwarz R&S SMW200A - Page 770

General Instrument Functions
R&S
®
SMW200A
770User Manual 1175.6632.02 ─ 30
Menu item Content Described in ...
Remote Access
GPIB Enables you to set the GPIB
address of the instrument.
Chapter 13.4.3, "GPIB Address
Settings", on page 789
Network Contains all relevant information
for the remote control of the
R&S SMW.
Chapter 13.4.1, "Network Set-
tings", on page 785
Visa Resource Strings Shows the VISA resource strings
provided for remote control via
the various interfaces.
Chapter 13.4, "Remote Access
Settings", on page 784
Instrument Emulations Enables you to emulate a remote
control command set of another
Rohde & Schwarz signal genera-
tor.
Chapter 13.4.5, "Instrument Emu-
lations Settings", on page 790
LXI Status Indicates the LAN - LXI connec-
tion parameters.
Chapter 13.5, "LXI Settings",
on page 795
Instrument Assembly
Hardware Config Provides an overview of all instal-
led hardware assemblies.
Chapter 15.7, "Requesting Instru-
ment Configuration and Specifica-
tions", on page 1262
Versions / Options Contains a list of all installed soft-
ware assemblies, and versions of
the data sheet , specification .
Chapter 15.7, "Requesting Instru-
ment Configuration and Specifica-
tions", on page 1262
Manage License Keys Explains how to enable an option
for the R&S SMW.
Chapter 12.4, "Managing Licen-
ses and License Keys",
on page 739
Manage Extensions Enables you to install firmware
extensions.
Chapter 12.5, "Managing Exten-
sions", on page 751
User Interface
Graphics Describes the different ways of
graphical signal display, the con-
tent, and the application of the
various graphs and the available
signal sources.
Chapter 9.1, "Displaying Base-
band Signal Characteristics in
Real-Time", on page 597
Display Sets the GUI language. Chapter 12.1.1, "Display and Key-
board Settings", on page 710
Start/Stop Display Update Enables you to deactivate the
update function of the GUI.
Chapter 12.1.3, "Display Update
Settings", on page 712
Appearance Disable the display of snapshot
dialogs in the taskbar.
Chapter 12.1.2, "Appearance Set-
tings", on page 711
Keyboard Sets the keyboard layout. "USB Keyboard > Layout"
on page 711
Define User Key Describes how to assign a func-
tion to the user key.
Chapter 12.3.4, "How to Assign
Actions to the [USER] Key",
on page 738
Reference