Network Operation and Remote Control
R&S
®
SMW200A
826User Manual 1175.6632.02 ─ 30
3. To check the progress of the recording, select "Context-Sensitive > Show SCPI
Recording List".
The "SCPI Recording List" dialog opens, displaying all recorded settings so far.
4. Proceed with How to check an SCPI list.
How to create a SCPI list with the current instrument settings in one step
You can also generate a SCPI list from a manually created instrument state at any
time, in only one step.
To generate an SCPI list with commands for all settings performed:
1. Select "Save/Recall > SCPI Export".
The instrument opens the standard file select dialog, see Chapter 11.4.1, "Save/
Recall Settings", on page 680.
2. In the "Format" entry field, select the source code.
3. Depending on the selected format, convert the script as described in Chap-
ter 13.8.5, "How to Convert and Save SCPI Lists", on page 828
4. Enter a filename.
5. Select "Export".
The instrument writes all SCPI commands of the key parameters and the modified
settings in the file. Also assigns the file extension automatically according to the
source code format.
6. To preview the content of the SCPI list:
a) Select SAVE/RCL.
b) Select "Operation Mode > SCPI-Export".
Automating Tasks with Remote Command Scripts
To Next Page
Loading...