Rohde & Schwarz R&S SMW200A - Page 905

Remote Control Commands
R&S
®
SMW200A
905User Manual 1175.6632.02 ─ 30
// SCONfiguration:OUTPut:MAPPing:BBMM2:MODE ADD
// SCONfiguration:OUTPut:MAPPing:BBMM1:STReam1:STATe ON
// SCONfiguration:OUTPut:MAPPing:BBMM2:STReam2:STATe ON
// SCONfiguration:OUTPut:MAPPing:BBMM1:STReam3:STATe ON
// SCONfiguration:OUTPut:MAPPing:BBMM2:STReam4:STATe ON
Example: Connecting and configuring external instrument
The following example lists the commands necessary to fulfill this task.
SCONfiguration:EXTernal:DISPlay ALL
SCONfiguration:EXTernal:REMote:CLEan
SCONfiguration:EXTernal:REMote:SCAN
SCONfiguration:EXTernal:REMote:SCAN:STATe?
// 0
SCONfiguration:EXTernal:CODer1:DIRection?
// Response: IN
SCONfiguration:EXTernal:BBMM1:DIRection?
// Response: OUT
SCONfiguration:EXTernal:IQOutput1:DIRection?
SCONfiguration:EXTernal:CODer1:IQConnection:STATe?
// Response: 1
SCONfiguration:EXTernal:BBMM1:IQConnection:STATe?
// Response: 1
SCONfiguration:EXTernal:REMote:LIST?
// Response: SMBV100A,SGS_2,SGT100A,SMBV_1,SMBV_2,SMU200A (100010)
SCONfiguration:EXTernal:REMote:ADD "SGS_1","USB","100007"
SCONfiguration:EXTernal:REMote:ADD "SMU200A (100001)","LAN","10.112.11.125","2"
SCONfiguration:EXTernal:REMote:LIST?
// Response: SMBV100A,SGS_2,SGT100A,SMBV_1,SMBV_2,SMU200A (100010),SGS_1,SMU200A (100001)
SCONfiguration:EXTernal:REMote:REName "SGS_2","SGS (102030)"
SCONfiguration:EXTernal:REMote:LIST?
// Response:
// SMBV100A,SGS (102030),SGT100A,SMBV_1,SMBV_2,SMU200A (100010),SGS_1,SMU200A (100001)
// Detecting a connected external instrument and connecting it
SCONfiguration:EXTernal:BBMM1:REMote:DETect?
// Response: "SGT100A"
SCONfiguration:EXTernal:BBMM1:REMote:ISELect?
// Response: "SGT100A","A"
SCONfiguration:EXTernal:BBMM1:REMote:CONNect
// Manually defining the external instrument
SCONfiguration:EXTernal:IQOutput1:REMote:ISELect "SGS_1","A"
SCONfiguration:EXTernal:IQOutput1:REMote:CONNect
SCONfiguration:EXTernal:IQOutput1:RCONnection:STATe?
// Response: 1
SCONfiguration Subsystem