Waveform analysis
R&S
®
RTM3000
119User Manual 1335.9090.02 ─ 09
Source......................................................................................................................... 119
Reference....................................................................................................................119
Copy............................................................................................................................ 119
State............................................................................................................................120
Load Reference...........................................................................................................120
Load Setup..................................................................................................................120
Save Reference.......................................................................................................... 120
Waveform Color.......................................................................................................... 120
Label........................................................................................................................... 121
└ Bit..................................................................................................................121
└ Label............................................................................................................. 121
└ Predefined Label...........................................................................................121
└ Edit Label......................................................................................................121
Source
Defines the source of the reference waveform. Any active channel, math or reference
waveform can be selected.
Remote command:
REFCurve<m>:SOURce on page 484
REFCurve<m>:SOURce:CATalog? on page 484
Reference
Selects one of the four possible reference waveforms.
Copy
Copies the "Source" waveform to the selected reference waveform. The reference
waveform is kept until you update it or load another waveform to the reference.
Reference waveforms
To Next Page
Loading...
