Documenting results
R&S
®
RTM3000
215User Manual 1335.9090.02 ─ 09
10 Documenting results
The R&S RTM3000 can store various data to files for further usage, analysis and
reporting:
●
Instrument settings: Chapter 10.1, "Saving and loading instrument settings",
on page 216
●
Waveforms: Chapter 10.2, "Saving waveform data", on page 217
●
Screenshots: Chapter 10.4, "Screenshots", on page 222
●
Reference waveforms
– Chapter 7.3, "Reference waveforms", on page 116
– Export and import: Chapter 10.6, "Export and import", on page 225
●
Measurement statistics: Chapter 8.2.1.1, "Statistics", on page 148
●
Equation sets (formularies): Chapter 7.2.7, "Saving and loading formularies",
on page 116
●
Search results: "To save search results" on page 132
●
Bus table with decode results: "To save the bus table" on page 255
You can also combine these data and save it to a compressed file using the
key,
see Chapter 10.5, "Quick save with onetouch", on page 224
► To save and load data, press the [Save Load] key.
Storage locations
Waveform data, screenshots and results, which are intended for analysis outside the
oscilloscope, are saved by default to a USB flash drive. The USB flash drive is the
To Next Page
Loading...
Need help?
General
