Power analysis (option R&S RTM-K31)
R&S
®
RTM3000
346User Manual 1335.9090.02 ─ 09
e) Scroll down. Select "Power".
f) In the "Power" menu, select "Statistics".
Visible
Activates or deactivates the statistical evaluation of the measurement.
Remote command:
POWer:STATistics:VISible on page 716
Average No.
Sets the number of measured waveforms used for calculation of average and standard
deviation. The maximum number is 1000.
Reset
Deletes the statistical results for the current measurement or all measurements,
respectivley, and starts a new statistical evaluation if the acquisition is running.
Remote command:
POWer:STATistics:RESet on page 716
Export
Opens the "Export" menu to save the measurement results to a CSV file.
14.4 Input power measurements
Input line analysis is used to measure the characteristics of the input power and the
effects the power supply exudes to the input line.
14.4.1 Quality
The power quality analysis measures the input voltage and current and the resulting
power. The results characterize the quality of the input AC line.
Input power measurements
To Next Page
Loading...
Need help?
General
