General instrument setup
R&S
®
RTM3000
228User Manual 1335.9090.02 ─ 09
11 General instrument setup
The general instrument settings are available in all operating modes.
11.1 Instrument settings
► To open the "Setup" menu:
a) Tap the "Menu" rhomb icon in the lower right corner of the screen.
b) Scroll down. Select "Setup".
Device Information
Displays information on the instrument, such as its serial number, the installed firm-
ware version and hardware information. This information is required if you have a sup-
port request. The dialog also contains a link to the "Open Source Acknowledgment".
Language
See Chapter 11.6, "Setting the date, time and language", on page 236.
Self Alignment
See Chapter 11.5, "Performing a self-alignment", on page 235.
Probe Adjust
Opens the wizard for probe compensation. You can find this function also when you
press the [Apps Selection] key.
See: Chapter 5.4.1, "Adjusting passive probes", on page 61.
Instrument settings
To Next Page
Loading...
Need help?
General
