Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
435User Manual 1335.9090.02 ─ 09
STOP
Stops the running acquistion.
Usage: Event
Asynchronous command
ACQuire:STATe
Sets or queries the acquisition state of the instrument.
Parameters:
<AcquisitionState> RUN | STOPping | COMPlete | BREak
RUN
Set: Starts the acquisition.
Read: The acquisition is running.
STOPping
Set: Stops the acquisition when it is finished.
Read: Acquisition is stopped.
COMPlete
Set: Not available.
Read: The current acquisition is finished and completed.
BREak
Set: Immediate interrupt of current acquisition.
Read: acquisition is finished but interrupted.
17.4.3 Vertical settings
CHANnel<m>:STATe...................................................................................................... 436
CHANnel<m>:AON........................................................................................................ 436
CHANnel<m>:AOFF.......................................................................................................436
CHANnel<m>:SCALe..................................................................................................... 436
CHANnel<m>:RANGe.................................................................................................... 436
CHANnel<m>:POSition...................................................................................................437
CHANnel<m>:OFFSet....................................................................................................437
CHANnel<m>:COUPling.................................................................................................437
CHANnel<m>:BANDwidth...............................................................................................438
CHANnel<m>:POLarity...................................................................................................438
CHANnel<m>:SKEW......................................................................................................439
CHANnel<m>:ZOFFset[:VALue]...................................................................................... 439
CHANnel<m>:WCOLor...................................................................................................439
CHANnel<m>:OVERload................................................................................................ 440
CHANnel<m>:THReshold............................................................................................... 440
CHANnel<m>:THReshold:FINDlevel................................................................................ 441
CHANnel<m>:THReshold:HYSTeresis............................................................................. 441
CHANnel<m>:LABel.......................................................................................................441
CHANnel<m>:LABel:STATe.............................................................................................441
Waveform setup