Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
503User Manual 1335.9090.02 ─ 09
EXPort:SEARch:NAME <FileName>
Defines the path and filename for search results that will be saved with EXPort:
SEARch:SAVE. The file format is CSV, the filename is incremented automatically.
You can change the file name manually in the [Search] > "Save" dialog. Remote con-
trol uses the recent settings.
Parameters:
<FileName> String parameter
Example:
EXPort:SEARch:NAME "/USB_FRONT/SEARCH/RESULT"
On first save, the search results are saved to RESULT.CSV, on
second save to RESULT01.CSV, the third to RESULT02.CSV ...
EXPort:SEARch:SAVE
Saves the search results to the path and file defined by EXPort:SEARch:NAME.
Usage:
Setting only
17.6.5 History (option R&S RTM-K15)
● History settings......................................................................................................503
● Displaying history segments................................................................................. 505
● Timestamps...........................................................................................................509
● Export of history data............................................................................................ 513
17.6.5.1 History settings
ACQuire:MEMory[:MODE] <MemoryMode>
Defines how the record length is set.
Parameters:
<MemoryMode> AUTomatic | DMEMory | MANual
AUTomatic
Automatically by the instrument
DMEMory
Predefined values are set with ACQuire:POINts[:VALue]
MANual
User-defined value is set with ACQuire:POINts[:VALue].
The number of available history segments is adjusted automati-
cally.
*RST: AUT
Waveform analysis