General instrument setup
R&S
®
RTM3000
231User Manual 1335.9090.02 ─ 09
"Set Password"
You can enter a password to prevent unauthorized activation or deac-
tivation of the education mode.
"Clear Password"
Deletes the password and allows all users enabling or disabling the
education mode. You have to enter the password first before you can
delete it.
Using the remote command, you can clear the education mode pass-
word without using the password.
Remote command:
SYSTem:EDUCation:PRESet on page 599
Secure Erase
Deletes current instrument configuration data and user data from the internal storage
(for example, reference files, equation sets, masks). Calibration data remains in the
storage.
Use this function before you send the instrument to the service. If the instrument is
used in a secured environment, the function ensures that all sensitive data is removed
before the instrument leaves the secured area.
Unintended "Secure Erase" is prevented by a notification that explains what happens if
you proceed. To start "Secure Erase", select "Yes", otherwise select "No". Do not turn
off the instrument before the erasing process has been completed.
11.2 Display settings
► To delete all waveforms and measurement results from the display, press the
[Clear Screen] key.
► To open the "Display" menu:
a) Tap the "Menu" icon in the lower right corner of the screen.
b) Scroll down. Select "Display".
Display settings
To Next Page
Loading...
Need help?
General
