Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
729User Manual 1335.9090.02 ─ 09
Parameters:
<Standard> ENA | ENB | ENC | END | MIL | RTC
EXPort:POWer:NAME <ExportPath>
Defines the path and filename for results of harmonics and spectrum power measure-
ments. Results are saved with EXPort:POWer:SAVE. The file format is CSV, the file-
name is incremented automatically.
Parameters:
<ExportPath> String parameter
EXPort:POWer:SAVE
Saves the harmonics and spectrum measurement results to the path and file defined
by EXPort:POWer:NAME.
Usage:
Event
17.12.8 Inrush current
POWer:INRushcurrent:EXECute......................................................................................729
POWer:INRushcurrent:GATE<n>:STARt...........................................................................729
POWer:INRushcurrent:GATE<n>:STOP........................................................................... 729
POWer:INRushcurrent:GCOunt....................................................................................... 730
POWer:INRushcurrent:REPort:ADD.................................................................................730
POWer:INRushcurrent:RESult<n>:AREA?........................................................................730
POWer:INRushcurrent:RESult<n>:MAXCurrent?...............................................................730
POWer:INRushcurrent:EXECute
Starts the inrush current measurement.
Usage:
Event
POWer:INRushcurrent:GATE<n>:STARt <StartTime>
Sets the start measuring time for the selected gate.
Suffix:
<n>
.
1..3
Parameters:
<StartTime>
POWer:INRushcurrent:GATE<n>:STOP <StopTime>
Sets the stop measuring time for the selected gate.
Power analysis (option R&S
RTM-K31)