Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
720User Manual 1335.9090.02 ─ 09
POWer:CONSumption:RESult:REALpower?
Queries the real power.
Return values:
<RealPower>
Usage: Query only
17.12.5 Dynamic ON resistance
POWer:DONResistance:EXECute................................................................................... 720
POWer:DONResistance:GATE<n>:START....................................................................... 720
POWer:DONResistance:GATE<n>STOP..........................................................................720
POWer:DONResistance:REPort:ADD.............................................................................. 720
POWer:DONResistance:RESult:DONResistance?.............................................................721
POWer:DONResistance:EXECute
Starts the dynamic on resistance measurement.
Usage:
Event
POWer:DONResistance:GATE<n>:START
Sets the start time for the corresponding gate.
Suffix:
<n>
.
1..2
Return values:
<StartTime>
POWer:DONResistance:GATE<n>STOP
Sets the stop time for the corresponding gate.
Suffix:
<n>
.
1..2
Return values:
<StopTime>
POWer:DONResistance:REPort:ADD
Adds the result to the report list.
Usage:
Event
Power analysis (option R&S RTM-K31)