Remote control commands
R&S
®
RTM3000
557User Manual 1335.9090.02 ─ 09
Parameters:
<MaximumLevel>
SPECtrum:DIAGram:COLor:MINimum[:LEVel] <MinimumLevel>
Sets the level used as a minimum of the color scale selected with SPECtrum:
DIAGram:COLor:SCHeme:SPECtrogram/SPECtrum:DIAGram:COLor:SCHeme:
FDOMain.
All level values lower than the minimum are displayed with the minimum color.
Parameters:
<MinimumLevel>
SPECtrum:DIAGram:COLor:SCHeme:FDOMain
<ColorScheme>
Sets the color scale for the display of the waveform in the frequency domain diagram.
Parameters:
<ColorScheme> MONochrome | TEMPerature | RAINbow
SPECtrum:DIAGram:COLor:SCHeme:SPECtrogram <ColorScheme>
Sets the color scale for the display of the spectrogram.
Parameters:
<ColorScheme> MONochrome | TEMPerature | RAINbow
SPECtrum:DIAGram:SPECtrogram[:ENABle] <Enable>
Enables the display of the spectrum diagram.
Parameters:
<Enable> ON | OFF
17.8.5 XY-Waveforms
DISPlay:MODE..............................................................................................................557
DISPlay:XY:XSOurce..................................................................................................... 558
DISPlay:XY:Y1Source.................................................................................................... 558
DISPlay:XY:Y2Source.................................................................................................... 558
DISPlay:MODE <Mode>
Sets the diagram mode.
Parameters:
<Mode> YT | XY
Applications
To Next Page
Loading...
Need help?
General
