Rohde & Schwarz RTM3K-COM2 User Manual

Remote control commands
R&S
®
RTM3000
569User Manual 1335.9090.02 ─ 09
Parameters:
<GainValue>
Usage: Query only
BPLot:MARKer<m>:SSCReen
Resets the marker to their initial positions. This is helpful if the markers have disap-
peared from the display or need to be moved for a larger distance.
Suffix:
<m>
.
1..2
Usage: Event
17.9 Documenting results
This chapter describes commands on how to transfer data from the instrument to a
computer, how to export data to file, how to print and save screenshots, and how to
manage measurement settings.
● Transfer of waveform data.................................................................................... 569
● Waveform data export to file................................................................................. 581
● Screenshots.......................................................................................................... 582
● Instrument settings: mass MEMomory subsystem................................................584
17.9.1 Transfer of waveform data
This chapter describes data transfer commands that have effect on other commands in
different applications of the instrument, and transfer commands that work in the same
way.
17.9.1.1 Format settings
FORMat[:DATA]............................................................................................................. 569
FORMat:BORDer...........................................................................................................571
FORMat[:DATA] <DataFormat>,<Accuracy>
Defines the format for data export with
●
CHANnel<m>:DATA? on page 571
●
CHANnel<m>:DATA:ENVelope? on page 573
●
CALCulate:MATH<m>:DATA? on page 575
●
REFCurve<m>:DATA? on page 576
Parameters:
<DataFormat> ASCii | REAL | UINTeger
Documenting results

Rohde & Schwarz RTM3K-COM2 Specifications

General

Brand	Rohde & Schwarz
Model	RTM3K-COM2
Category	Test Equipment
Language	English