Rohde & Schwarz RTM3K-COM2 User Manual

Remote control commands
R&S
®
RTM3000
509User Manual 1335.9090.02 ─ 09
CALCulate:MATH<m>:HISTory:PLAYer:STATe <PlayerState>
BUS<b>:HISTory:PLAYer:STATe <PlayerState>
DIGital<m>:HISTory:PLAYer:STATe <PlayerState>
LOGic<p>:HISTory:PLAYer:STATe <PlayerState>
SPECtrum:HISTory:PLAYer:STATe <PlayerState>
CHANnel<m>:HISTory:PLAYer:STATe <PlayerState>
Starts and stops the replay of the history segments.
Parameters:
<PlayerState> RUN | STOP
*RST: STOP
17.6.5.3 Timestamps
You can query the timestamps of history segments in two ways:
●
Query for the timestamps of all history segments using ...:HISTory:...:ALL
commands.
●
Query for the timestamp of a specific segment using ...:HISTory:... com-
mands. Select the segment of interest using CHANnel<m>:HISTory:CURRent
appropriate command.
The commands in this chapter use numeric suffixes:
●
CHANnel<m>: Selects the analog input channel.
●
MATH<m>: Selects the math waveform, range 1..4
●
DIGital<m>: Selects the logic channel, range 0..15
●
LOGic<p>: Selects the logic pod, range 1..2
●
BUS<b>: Selects the bus, range 1..4
CALCulate:MATH<m>:HISTory:TTABle[:ENABle].............................................................. 510
BUS<b>:HISTory:TTABle[:ENABle].................................................................................. 510
DIGital<m>:HISTory:TTABle[:ENABle]..............................................................................510
LOGic<p>:HISTory:TTABle[:ENABle]................................................................................510
CHANnel<m>:HISTory:TTABle[:ENABle].......................................................................... 510
CHANnel<m>:HISTory:TMODe........................................................................................510
CALCulate:MATH<m>:HISTory:TSRelative?..................................................................... 510
BUS<b>:HISTory:TSRelative?......................................................................................... 510
DIGital<m>:HISTory:TSRelative?..................................................................................... 511
LOGic<p>:HISTory:TSRelative?.......................................................................................511
SPECtrum:HISTory:TSRelative?...................................................................................... 511
CHANnel<m>:HISTory:TSRelative?..................................................................................511
CALCulate:MATH<m>:HISTory:TSRelative:ALL?...............................................................511
BUS<b>:HISTory:TSRelative:ALL?...................................................................................511
DIGital<m>:HISTory:TSRelative:ALL?...............................................................................511
LOGic<p>:HISTory:TSRelative:ALL?................................................................................ 511
SPECtrum:HISTory:TSRelative:ALL?................................................................................511
CHANnel<m>:HISTory:TSRelative:ALL?...........................................................................511
CALCulate:MATH<m>:HISTory:TSABsolute?.................................................................... 511
BUS<b>:HISTory:TSABsolute?........................................................................................ 511
Waveform analysis

Rohde & Schwarz RTM3K-COM2 Specifications

General

Brand	Rohde & Schwarz
Model	RTM3K-COM2
Category	Test Equipment
Language	English