Remote control commands
R&S
®
RTM3000
444User Manual 1335.9090.02 ─ 09
RCONtinuous
Starts continuous acquisition, like the [Run Stop] key. The acqui-
sition is running as long as you press the micro button again.
RSINgle
Run single: starts one acquisition.
AUToset
Starts the autoset procedure.
NOACtion
Nothing is started on pressing the micro button.
*RST: RCONtinuous
PROBe<m>:ID:BUILd?
Returns the build number of the probe software.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Return values:
<BuildNumber> 32 bit number
Range: 0 to 4294967295
Increment: 1
Usage: Query only
PROBe<m>:ID:PARTnumber?
Returns the R&S part number of the probe.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Return values:
<PartNumber> Part number in a string
Usage: Query only
PROBe<m>:ID:PRDate?
Returns the production date of the probe.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Return values:
<ProductionDate> Date in a string
Usage: Query only
Waveform setup
To Next Page
Loading...
