Remote control commands
R&S
®
RTM3000
681User Manual 1335.9090.02 ─ 09
BUS<b>:MILStd:RESPonsetime:MAXimum <MaximumTime>
Sets a value for the maximum response time.
Suffix:
<b>
.
1..2
Parameters:
<MaximumTime>
BUS<b>:MILStd:RESPonsetime:MINimum <MinimumTime>
Sets the minimum response time.
Suffix:
<b>
.
1..4
Parameters:
<MinimumTime>
BUS<b>:MILStd:SOURce <Source>
Sets the channel for the signal source for the MIL-STD-1553 analysis.
Suffix:
<b>
.
1..4
Parameters:
<Source> CH1 | CH2 | CH3 | CH4
*RST: CH1
BUS<b>:MILStd:THReshold:HIGH <UpperLevel>
Sets the upper threshold level of the signal.
Suffix:
<b>
.
1..4
Parameters:
<UpperLevel>
BUS<b>:MILStd:THReshold:LOW <LowerLevel>
Sets the lower threshold level of the signal.
Suffix:
<b>
.
1..4
Parameters:
<LowerLevel>
Serial bus analysis
To Next Page
Loading...
Need help?
General
