Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
693User Manual 1335.9090.02 ─ 09
Usage: Query only
BUS<b>:MILStd:WORD<n>:STATus?
For a status word returns the value and if there are errors.
Suffix:
<b>
.
1..4
<n> *
Parameters:
<WordState> OK | INSufficient | PERRor | MERRor | TERRor | SERRor
Usage: Query only
BUS<b>:MILStd:WORD<n>:STATus:BCReceived?
Returns the state of the broadcast command received bit of the specified status word.
Suffix:
<b>
.
1..4
<n> *
Return values:
<BitState>
Usage: Query only
BUS<b>:MILStd:WORD<n>:STATus:BUSY?
Returns the state of the busy bit of the specified status word.
Suffix:
<b>
.
1..4
<n> *
Return values:
<BitState>
Usage: Query only
BUS<b>:MILStd:WORD<n>:STATus:DBCaccept?
Returns the state of the dynamic bus control bit of the specified status word.
Suffix:
<b>
.
1..4
<n> *
Return values:
<BitState>
Serial bus analysis