Operation
Bunker unloading
328 / 564
(50) Raise unload conveyor manually
You can raise the unload conveyor with this key. If this key is pressed for longer than
2 seconds, then a beep sounds and the unloading conveyor automatically moves into
operating position.
If you press additionally to the key the multi-key (56) on the unload conveyor oper-
ating panel, the unload conveyor articulation part 2 (2) is swung upwards.
(51) Lower unloading conveyor manually
As long as this key is pressed, the unloading conveyor is lowered.
ADVICE
This key (51) is only active when the unload conveyor articulation part 1 (1) has been
swung out completely into the operating position.
To Next Page
Loading...