Users are able to perform various operations on the events, such as filtration, aggregation and counting. The Filter button is
deactivated by default. Click this button if you want to turn on the filter. Click on the gear icon to set the filter. A text box
appears where you can enter the severity, status and start and end date and time. Click OK when done.
The controller gives you the option of exporting the data as a CSV file.
FIGURE 2 Events
c.
NOTE
Refer to Alarm Types on page 57 and Events Types on page 141 for the list of alarm and event that the SCG and vSZ-H
generates.
NOTE
Refer to
SNMP MIB Reference Guide
for the list of SNMP alarm traps that the controller generates.
NOTE
Refer to Administrator Guide for Viewing of Alarms and Events.
Alarm and Event Management
Alarm and Event Management
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
56 Part Number: 800-71565-001 Rev A
To Next Page
Loading...
Need help?
General
