Siemens Hipath 5000 - Page 1087

pcodes.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
A-29
System Programming Codes (Expert Mode Codes)
32 6 PSE data transfer; select sequence: 1 = Operating mode, 2 = Call no., 3
= Text
32 7 PSE dial assignment; select station (not for U.S.)
32 8 PSE dial numbers; select index
33 Attendant
33 1 Queued calls
33 3 Speed extending: 0 = denied, 1 = allowed
33 4 Extend undialed lines: 0 = denied, 1 = allowed
34 DISA
34 1 Day/night. select slot / line: 0 = None, 1 = Only night, 2 = Only day, 3 =
Day and night
34 2 DID number
34 3 Security mode: 0 = After timeout, 1 = After #
34 4 CAID admin (for U.S. only)
35 Least cost routing (LCR) (optiset E memory and optiPoint 600 office
only)
35 1 LCR on or off: 0 = off, 1 = on
35 2 Digit transmission: 0 = Digit-by-digit, 1= En-bloc sending
35 3 Dial rule
35 3 1 Name; select line
35 3 2 Format; select line
35 3 3 Type; select line: 0 = undefined, 1 = main network supplier, 2 = 1-level,
3 = 2-level, 4 = CN, 5 = DICS, 6 = PRI
35 4 Authorization code; select index (1-16)
35 5 LCR - schedule
35 5 1 Time limit; select day index (1 = Monday to 7 = Sunday) and time format
(hhmm)
35 5 2 Timezone; select day index (1 = Monday to 7 = Sunday) and time period
1-8
35 6 Class of service (1 to 15); select station
35 7 Route tables
35 7 1 Route; select table/line
Table A-3 Expert Mode Codes
Code Function