Service
P31003-H3560-S403-54-7620, 09/05
12-18 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Service and Maintenance Tasks
12.2.5 Determining System Information and Installed Software
Components (HiPath Inventory Manager)
Definition
HiPath Inventory Manager is a service for detecting the installed software components and sys-
tem information in a HiPath 3000/5000 network. System information is only determined upon
initial start-up of the service.
The relevant information can be displayed in table format by clicking one of the following but-
tons:
● Master Setup
Information including version and installation date of the master setup.
● HiPath 3000
Hardware and software information regarding the HiPath 3000 systems in the network and
the installed HG 1500 boards.
● HiPath Applications
Information regarding the following software components:
– MS Windows components (MS Internet Explorer, DNS server, DHCP server)
– Media Streaming
– TAPI
– CCMC, CCMS, CMD, CSP
– Administration
– HiPath 5000 Server
– GetAccount
– HiPath 3000 Manager E
– Common Software
● Operating System
Information regarding the current operating system.
All information can be updated at any time via the “Update data” button.
The system information is automatically determined when the HiPath Inventory Manager ser-
vice is started for the first time. A cyclic update can be performed every 1 days. The system
information can be queried manually at any time. This should always be done before an update/
upgrade, for example.
Further details on how to determine the system information using HiPath Inventory Manager
can be obtained from the help provided with this tool.
To Next Page
Loading...
Need help?
General