Siemens Hipath 5000 - Figure 8-5 Licensing Procedure When Upgrading Opticlient Attendant V6.0 - V7.0 on Hipath; Upgrading Opticlient Attendant V6.0 - V7.0 as Part of an Upgrade to Hipath

Licensing
P31003-H3560-S403-54-7620, 09/05
8-30 HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
licensing.fm
Licensing optiClient Attendant
8.5.3 Upgrading optiClient Attendant V6.0 –> V7.0 As Part of an
Upgrade to HiPath 3000 V5.0.
As part of the upgrade to HiPath 3000 V5.0, the licensing procedure for optiClient Attendant
changes:
In order to ensure unique licensing, the new license file is linked with the MAC address of the
HiPath 3000 control board.
Procedure
HiPath 3000 < V5.0
Licensing is performed on the optiClient At-
tendant.
–>
HiPath 3000 V5.0
Licensing is performed on the associated
HiPath 3000 system.
>
The procedure described below assumes that the HiPath 3000 upgrade to V5.0
has already been completed.
Figure 8-5 Licensing procedure when upgrading optiClient Attendant V6.0 –> V7.0 on Hi-
Path 3000 V5.0
Step Activity (Remarks)
1. Read the customer data record of the HiPath 3000 V5.0.
2. Read out the MAC address of the HiPath 3000 control board.
optiClient
Attendant 1
HiPath 3000
V5.0
HiPath 3000
Manager E
(CLS)
CLC
CLM
optiClient
Attendant 6
V.24,
USB or
TCP/IP
CLA
6
1
5
2
3
4